Share Print this Page Recently Viewed

Recently Viewed Products

 
 

Garrett Walk-Through Accessories




GARRETT QUICK-Q SOFTWARE PACKAGE
Advanced Security Scanning Technology
quick-q-banner-2000x496


 
  • Garrett is the industry leader with superior pinpoint detection technology and unmatched discrimination features. The Quick-Q technology sets the standard for today’s need to provide quicker venue access into stadiums, arenas, outdoor events, convention centers and concert halls. This technology has the effectiveness of moving high volumes of patrons through events by reducing line queues and large crowds outside the venue.
  • When used with Garrett’s enhanced walk-through metal detectors, the Quick-Q technology does not require the divestment of cell phones or other small metallic items. This should reduce the number of items divested as fans are screened and improve ingress through-put rates.
  • Part No. 1628500 for use with Garrett PD 6500i only.
   
 


WALK-THROUGH CASTER SETS

Includes two (2) rigid locking casters and two (2) swivel locking casters.

1169101_caster_set_greyscale

1168414_PD_6500i_with_casters_808x1500
  • Ideal for schools, special events, and stadium use. Allows full mobility of PD 6500i walk-throughs by one person. No Lifting required. Move the detectors to a secure location when not in use and provide an unimpeded exit at the close of an event.
  • Extreme stability combined with portability. Two fixed casters with locking devices provides stable detector operation, while two swivel casters with locking devices provide maneuverability. The assembly can be permanently attached to walkthrough’s base.
  • All terrain environment design. 3-inch wheels allow movement over any hard surfaces. Durable, powder coated steel allows use in all types of environmental conditions. For wind speeds up to 20 mph (32 kph). Available with swivels on either 2 or 4 wheels.
  • Shipping Weight: 21 lbs (9.5kg)
  • Shipping Size: 40 1/4” x 8 5/8” x 5”
  • Part No. 1169101 for use with Garrett PD 6500i and MZ 6100.
     
   


 
BATTERY MODULES
These optional battery modules are field-installable assemblies. While recharging, a monitoring circuit allows the batteries to charge in minimal time and then switches to trickle charge to ensure maximum charge without battery damage. The charge status is indicated on the LCD of the Garrett walk-through detector’s control panel and an alarm warns the operator when batteries are low. 


2225400_battery_backup_module_blk_sm
 
  • PD 6500i Battery Module, lithium ion
  • Part No. 2225420 for use with Garrett PD 6500i only.
  • PD 6500i Battery Module, gel cell
  • Part No. 2225410 for use with Garrett PD 6500i only.
  • MZ 6100 Lithium Battery Module, 1.5 A-Hr
  • Part No. 1171300 for use with Garrett MZ 6100 only. 
  • MZ 6100 Battery Module, lithium ion, 14 A-Hr
  • Part No. 1171400 for use with Garrett MZ 6100 only.
   



 
NETWORKING / MONITORING ACCESSORIES
 

icmodule

  • iC MODULE 
  • The iC Module allows users to communicate to a walk-through metal detector with a laptop or desktop PC through the network either wired or wirelessly. It allows control, real time monitoring and diagnostics from a remote location. The internal memory records all changes to settings and passenger traffic and alarm history for analytical evaluation.
  • Part No. 1171600 for use with the Garrett PD 6500i or MZ 6100.
   

1168800_Wireless_Sync_SM_100

  • GARRETT WIRELESS SYNC SM 100
  • For use in operating multiple Garrett PD 6500i walkthroughs.
  • Part No. 1168800 for use with Garrett PD 6500i only.
   
1171200-Relay-Module-angle700x523
  • RELAY MODULE
  • Provides an isolated relay contact to control lights, doors, equipment. Internal dip switches provide 4 operating modules.
  • Part No. 1171200 for use with Garrett PD 6500i or MZ 6100.
   
2266400_desktop_remote
  • PD 6500i DESKTOP REMOTE CONSOLE WITH ZONE INDICATION
  • For remote operation of the detector. Includes 50-foot cable. (optional lengths available)
  • Part No. 2266400 for use with Garrett PD 6500i only.
   
1171100-Desktop-Remote-for-MZ6100-3
  • MZ 6100 DESKTOP REMOTE CONSOLE WITH ZONE INDICATION
  • For remote operation of the detector. Includes 50-foot cable. (optional lengths available)
  • Part No. 1171100 for use with Garrett MZ 6100 only.
   
1169400_remote_control_lg
  • PD 6500i REMOTE CONTROL
  • Part No. 1169400 for use with Garrett PD 6500i only.
   
1169500_mz_6100_IR_remoteControl
  • MZ 6100 IR REMOTE CONTROL
  • Part No. 1169500 for use with Garrett MZ 6100 only.
   
1171700_zone_set
  • ZONE INDICATOR SET, PANEL B, MZ 6100
  • Provides pacing light and zone indicators on entry and exit sides of both panels. Factory installation recommended.
  • Part No. 1171700 for use with Garrett MZ 6100 only.
   




 
MOBILITY / STABILITY ACCESSORIES
 

1603901-Stabilizer-Base800x533

  • STABILIZER BASE
  • 2 included.
  • Part No. 1603901 for use with Garrett PD 6500i and MZ 6100.
     
   

1604100_adhesive_floor_mount_kit

  • ADHESIVE FLOOR MOUNT KIT
  • 2 included.
  • Part No. 1604101 for use with Garrett PD 6500i and MZ 6100.
     
   
1169200_transportion_brace_lg
  • TRANSPORTATION BRACES
  • Provides a collapsible solution that supports the walk-through metal detector during transportation.
  • Part No. 1169200 for use with 30" standard Garrett walk-throughs.
  • Part No. 1169228 for use with 28" standard Garrett walk-throughs.
  • Part No. 1169232 for use with 32" standard Garrett walk-throughs.
   
 


 
 
SECURITY TEST PIECES
 

OTP

  • OPERATION TEST PIECE (OTP) 
  • Designed to FAA 3-gun test requirements.
  • Part No. 1600600 can be used with all Garrett model detectors.
     
   

FTP

  • FLAT TEST PIECE (FTP) 
  • Designed to represent a small knife or box cutter.
  • Part No. 1620570 can be used with all Garrett model detectors.
     
   

 


 
CORDS / CABLES / MISC. ACCESSORIES
 

 

9436900-5-foot-charging-cord_lg_0

  • 5 FT. CHARGING CORD
  • Allows charging multiple walkthroughs from a single power source.
  • Part No. 9436900 can be used with all Garrett model detectors.
     
   

 

9431900_10_power_0

  • 10 FT. JUMPER CORD
  • Allows multiple walk-through units to be linked to the same power source when operated in close proximity.
  • Part No. 9431900 can be used with all Garrett model detectors. 
     
   
1605300-Cable-Feed-Through-ver2-800x533
  • CABLE FEEDTHROUGH KIT
  • Allows waterproof connection of power cord through the top of a detection head.
  • Part No. 1605300 can be used with all Garrett model detectors.
   
9884900_Cover_Support_PD6500i_700_0
  • COVER SUPPORT
  • Use with or without Garrett Environmental Cover (Part No. 1627030). Provides extra rain protection when secured to the top of a PD 6500i walk-through detector or when zipped into the Environmental Cover.
  • Part No. 9884900 for us with Garrett PD 6500i only.
   
1627030-1627032-environmental-cover-all_0
  • ENVIRONMENTAL COVER, SOFT
  • High quality UV-resistant, anti-mildew nylon cover. Protects walkthrough electronics from heavy rain and dust. Clearview window panels over touchpads, optics, and zone indicators.
  • Part No. 1627030 for use with standard 30” width Garrett PD 6500i only.
  • Part No. 1627032 for use with 32” width Garrett PD 6500i only.
   
bucket_0
  • 6” POCKET ITEM CONTAINER
  • For placement of pocket items prior to screening.
  • Part No. 1601200 for us with all Garrett model detectors.
   
1611100-speed-assembly-kit
  • SPEED ASSEMBLY KIT
  • Quick screws with knurled hand knobs for easier hand tightening. Comes with 8 screws.
  • Eliminates the need for tools when assembling and disassembling a walk-through.
  • Part No. 1611100 for us with Garrett PD 6500i or MZ 6100.

 

 
1628300-Divesting-table-18x60x29half_800x815-ver3
  • DIVESTING TABLE
  • 60” Length
  • 18” Width
  • 29.5” Height
  • Part No. 1628300